Nitrous Outlet Digital Progressive Controller with built in window safety switch, tps activation, gear lock out features and automatic lean cut.

• Nitrous Outlet's Progressive Contoller is an affordable, compact, and easy to use controller.
• Will easily fit into small spaces giving you more flexibility in install options.
• Hi amp continuous duty circuits
• No computer needed!
• Adjust Start% and Build Time.
• Reset option for clutch cars.
• 40 amp capable draw.
• 2 independent RPM activation and RPM deactivation.
• 1 progressive channel
• Lean cut off feature (wideband required).
• TPS activation for falling signal, rising signals, low voltage signals, irregular signals and mechanical wide open throttle.
• Multi Gear lock Out Feature allows delaying the stage from activation.
• Can be used as a progressive controller only or use all controller features.
• Ground & Hot Output wires allow multiple accessory activations for use with timing retards, indication lights etc.
• Digital Hand Held Controller with LED read out for ease of programming and diagnosis, Conforms Vehicle RPM, Shows wide open throttle activation, shows gear lock out status, and shows activation status.

FJO-Digital Progressive Controller

• Laptop programmed (no dials or chips to go bad)
• TPS Voltage either rise or fall
• RPM window switch w/built in multiplier (works with any vehicle)
• Stage One Activation
• Stage 2 Activation
• Trans-brake input (No nitrous activation while applying a trans-brake)
• Low and High rpm window set points
• On or Off during the preset window
• Water tight epoxy construction
• With the solenoid driver(s) you can do the following; Stage One/two Ramp time, Turn on RPM Turn off RPM, Solenoid Frequency Adjustability